YONGNUO YN560-TX PRO speedlite transmitter is a upgrade version based on YN560TX II, with TTL/ high speed sync functions, its radio protocol achieves cross-brand compatibility.
ØYN560-TX PRO can control, trigger YN200/YN862 series and the models which have been upgraded to the latest firmware such as YN622C(N) II/YN685/YN968C/
ØYN968N(II) (in 560RX mode) to realize ETTL/M/Multi flash, high speed sync, focal length control functions.
ØCompatible with radio flash and flash trigger models such as YONGNUO YN560III/IV/YN660/YN720/YN860Li/RF603 series /RF605 series directly, realize M/Multi flash functions.
Ø16 channels, up to 10,000 customizable photographer ID, A/B/C/D/E 5 flash groups
ØFully supports ETTL/M/Multi/GR flash mode.
ØSupports front-curtain sync, second curtain sync(M mode),high speed sync
ØSupports ETTL ratio, flash exposure compensation, flash exposure Lock, flash exposure bracketing, modeling flash functions.
Ø2.4G radio Maximum communication distance is over 100m.
ØSupports remote control focal settings of slave unit flash (only for YONGNUO compatible flashes)
ØFirmware can be upgraded via USB(Micro-USB)
ØHigh resolution dot-matrix LCD, backlight for keys
ØFast lock mechanism
ØBuilt-in AF assist beam emitter
Type: 2.4G On-camera Speedlite transmitter
Exposure control system: E-TTL II/E-TTL Autoflash, Manual flash, Multi flash, Gr flash
Channel: Ch1 - 16
Slave unit control: Up to 5 groups (A/B/C/D/E)
Transmission distance: Approx. 100 m
Flash ratio control:1:8 - 1:1 - 8:1, 1/2-stop increments
FEC: ±3 stops in 1/3-increments
High-speed sync: Provided
Manual flash:1/1 - 1/128 power (1/3-stop increments)
Stroboscopic flash: Provided (1 - 500 Hz)
AF assist Beam Emitter: Provided
Firmware update: Provided
Power source:2 AA/LR6 alkaline batteries Ni-MH batteries
Dimensions: Approx. 67.7x 66.7x 81.3mm
Weight: Approx. 110 g (transmitter only, excluding batteries)