ØEquipped with LED Light
Equipped with a high power LED light of high power, brightness can be adjusted, there is a built -in diffuser and a color conversion filter for the LED light.
ØCompatible with YN622C and YN560 Wireless System
When YN968C is used as master unit, it can control and fire YN968C/YN622C(II)/YN685C being slave unit. When YN968C is set as YN622 (slave mode), it can received control signal or trigger signal from master unit YN968C/YN622C(II)/YN622C-TX, and achieves slave flash in TTL/M/Multi mode. When YN968C is set as YN560 (slave mode), it can receive control signal or trigger signal from YN560-TX (II)/RF603 (II)/RF605, and achieves flash in M/Multi mode.
ØHigh Guide Number, Supports High-speed Sync
GN60@ISO100,200mm, supports high-speed sync TTL, manual flash, multi flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s.
ØSupport Auto/Manual Zooming
The YN968C supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm.
ØSupports USB Firmware Upgrade
The YN968C equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash.
ØSupports Wireless Optical Slave function
The YN968C supports receiving YONGNUO, Canon' s and Nikon' s wireless optical master signal, supports S1 and S2 flash mode.
ØSettings Save Automatically, Supports Custom Functions (C.Fn)
ØUltra fast Charging Recycle System, Supports External Power Supply
ØEquipped with Big Size LCD Display Screen, Standard PC Synchronous Interface
*The transmission distance may be shorter depending on the conditions such as the positioning of slave units, the surrounding environment and weather conditions.
The functions of this page are based on test conditions of our company. Further notice will not be given if the design and specifications change.
Driver & Software: